Custom RAM Mount Builder

*Choose one base, one arm, and one cradle for a complete set.
Base
Custom RAM Mount Builder

RAM Suction Cup Single Twist Lock & Diamond Base (RAM-B-224-1U)

Tired of suction cup mounts that fail a few minutes into a flight? These heavy-duty suction cups have a twist/lock mechanism that securely hold your mount to a windshield or non-porous flat surface. Comes assembled with the 1" RAM mounting ball. Includes RAM-B-224-1U (3.3" diameter suction cup twist lock base) and diamond base with 1" rubber ball (RAM-B-238U). The suction cup is designed to have an extra strong hold on any smooth non-porous surface, but for best result, mount the suction cup on a glass or non-porous plastic surface.

These are simply the finest mounting systems available. Every RAM Mount carries a Lifetime Warranty.

Includes:

  • Suction Cup Mount
  • Mounting Ball

Out of stock

$16.99
Custom RAM Mount Builder

RAM Double Suction Cup Mount

Need some extra holding strength? This mount uses two heavy-duty RAM suction cups to provide an extra-firm base. Great for mounting heavy items like iPads or large portable GPS units. Includes RAM part number RAM-B-189BU and RAM-B-202U.

Includes:
  • 2 RAM suction cups
  • Aluminum base plate
  • RAM circular base with 1” mounting ball
Comes preassembled for your convenience.

Out of stock

$36.95
Custom RAM Mount Builder

RAM Claw Yoke Mount (RAP-B-400U)

The Claw base fits yokes and exposed tube shafts measuring 0.625” to 1.5” in diameter. It's ideal for mounting to most Cessna, Piper and Mooney yokes. Easy to install - just twist until tight. Includes rubber coating on inside to prevent slipping and scratches. RAM part number RAP-B-400U. For larger yokes (including Beechcraft), order product 7575A.

These are simply the finest mounting systems available. Every RAM Mount carries a Lifetime Warranty.

Includes: Yoke Mount with Ball

$31.95
Custom RAM Mount Builder

RAM Large Claw Yoke Mount (RAP-B-401U)

This updated yoke clamp is perfect for aircraft with larger yoke shafts, like Beechcraft and some older Piper models. With a clamping range from 1” to 2.25”, this mount easily adapts to a multitude of aircraft. Rubber pads on the inside of the claw provide stable, even gripping and protection of mounting surfaces. Made in the USA. Lifetime warranty. RAM part number RAP-B-401U.

For smaller yokes like Cessna and Mooney, choose item 9250A.

 

$41.95
Custom RAM Mount Builder

Classic RAM Yoke Mount (RAM-B-121BU)

This classic design fits any yoke up to 1 1/4" thick, including most Cessna and Piper yokes. For a lower profile design, consider product 9250A. These are simply the finest mounting systems available. Every RAM Mount carries a Lifetime Warranty.

Includes: Yoke Mount with Ball

$23.95
Custom RAM Mount Builder

Ram Glare Shield Mount (RAM-B-259U)

This mount is a great alternative to yoke mounting. Uses two screws with protective covers to securely mount to the glare shield of the aircraft. These are simply the finest mounting systems available. Every RAM Mount carries a Lifetime Warranty.

Includes: 

Glareshield Mount with 1" mounting ball

$23.95
Custom RAM Mount Builder

RAM V-Shape Base Mount (RAM-B-108BU)

This flexible and adaptable mount consists of a 1" diameter rubber ball connected at a right angle to a v-shaped base. The RAM-B-108BU accommodates rails from 1.0" to a maximum of 2.1" in diameter. To mount the RAM-B-108BU base, place the saddle shaped plate on the rail then wrap the metal clamp strap around the rail and plate. Tighten the screw knob on the metal strap with a screw driver until the strap has a firm hold on the rail. The RAM-B-108BU is an alternative mounting base for Beechcraft airplanes with a “throw over yoke.”

$19.95
Custom RAM Mount Builder

Ram Mount Tube/Handle Mount (RAM-B-231-1U)

This base accommodates any rail or tube from 0.50” to 1.25” in diameter. Perfect for planes with exposed tubes, this RAM base provides a semi-permanent option for mounting RAM mount systems using the standard 1” ball.

Every RAM Mount carries a Lifetime Warranty. RAM part number RAM-B-231-1U.

$12.95
Custom RAM Mount Builder

Ram Circle Base with 1 Ball" (RAM-B-202U-2)

This marine grade aluminum base contains a 1” diameter rubber ball connected to a flat 2.5” diameter base. Pre-drilled hole fit most aviation hand-held GPS units with the universal AMPS hole pattern. For use with other RAM Mount parts. RAM part number RAM-B-202U-2.

Every RAM Mount carries a Lifetime Warranty.

Out of stock

$5.95
Custom RAM Mount Builder

RAM Diamond Base (RAM-B-238U-5)

Standard 1" rubber ball works with almost all RAM mounts. Connected at right angle to a 2.43" x 1.31" diamond base, which has two holes 1.912" from center to center (fits industry standard AMPS pattern). Ideal for permanently mounting gear to the panel of an experimental aircraft. These are simply the finest mounting systems available. Features sturdy aluminum construction and a durable powder coat finish. Every RAM Mount carries a Lifetime Warranty. RAM part number RAM-B-238U-5.

$6.04
Custom RAM Mount Builder

Ram Circle Base with Hardware (RAM-B-202U-G)

This marine grade aluminum base contains a 1” diameter rubber ball connected to a flat 2.5” diameter base. Pre-drilled holes fit most aviation hand-held GPS units with the universal AMPS hole pattern. Includes mounting hardware. For use with other RAM Mount parts. RAM part number RAM-B-202U-G.

Every RAM Mount carries a Lifetime Warranty.

$12.95
Custom RAM Mount Builder

RAM Add-A-Ball Accessory

Connect another device to your existing RAM® Mount with this adapter. This ball is a standard 1" ball connecting to a 1/4"-20 threaded stud with a length of 1.6". The threads on this ball replace the bolt in any B-size standard socket arm, and the ball connects to the middle of the socket arm on the opposite side of the tightening knob. 

If you are looking to mount more than one device but cannot locate multiple mounting points on your aircraft, this base is the ideal accessory for connecting both devices to one mounting base.

$11.95
Arm
Custom RAM Mount Builder

Ram Standard Arm (RAM-B-201U)

This is the most popular RAM mounting arm and is used for most yoke and suction cup mounting applications. Measures 3 3/4" in length (total), or 3" from socket to socket. Fits standard 1" balls. These are simply the finest mounting systems available. Every RAM Mount carries a Lifetime Warranty. RAM part number RAM-B-201U.

 

$13.50
Custom RAM Mount Builder

Ram Small Arm (RAM-B-201U-A)

If space is an issue, this small RAM arm is over an inch shorter than the standard arm. Usually found with glare shield mount kits, these arms provide all the strength and adjustability, with a smaller footprint. A favorite in small cockpits. These are simply the finest mounting systems available. Every RAM Mount carries a Lifetime Warranty. Measures 2 1/2” in length; 1 3/4" from socket to socket. RAM part number RAM-B-201U-A.

$12.25
Custom RAM Mount Builder

RAM Long Arm (RAM-B-201U-C)

This long arm has a socket at both ends that accommodate the standard 1” RAM mounting ball. Measures 6” long; 5.25" from socket to socket. These are simply the finest mounting systems available. Each features sturdy aluminum construction, a durable powder coat finish and infinitely adjustable rubber ball joints. Every RAM Mount carries a Lifetime Warranty. RAM part number RAM-B-201U-C.

$19.95
Custom RAM Mount Builder

RAM Double Ball Adapter (RAM-B-230U)

Extend the reach of your RAM mount with this double mount adapter. Use multiple arms (sold separately) to make a customized mounting solution for your plane. Standard 1" rubber ball on each end; total length is 1.75". RAM part number RAM-B-230U.

$14.95
Custom RAM Mount Builder

RAM Double Socket Swivel Arm (RAP-B-200-2U)

This RAM arm consists of double 1" diameter open ball sockets with a 360 degree rotation point at the center. A connecting swivel joint rotates forward and back 180 degrees to give unsurpassed adjustability. Measures 6.25” long; 5.5" from socket to socket. Every RAM mount carries a Lifetime Warranty. Made in the USA. RAM part number RAP-B-200-2U.

Out of stock

$24.95
Cradle
Custom RAM Mount Builder

RAM iPad Air/Pro 9.7" Cradle (RAM-HOL-AP17U)

This cradle securely holds the iPad 9.7" (2017), iPad Pro 9.7" and iPad Air 1-2. Patent pending EZ-Roll’R™ design allows for smooth placement and removal of the iPad while keeping it secure while on the go. This cradle comes with a standard 1” ball installed on the back. For use with other RAM mounting system components. Not compatible with iPad cases. RAM part number RAM-HOL-AP17U.

Includes:
  • iPad cradle
  • Circular mounting plate with 1” ball 


Lifetime Warranty
These are simply the finest mounting systems available. Every RAM Mount carries a Lifetime Warranty.

 

Compatibility

Fits iPad 9.7" (2017), iPad Pro 9.7" and iPad Air 1-2, without cases.

Out of stock

$27.95
Custom RAM Mount Builder

RAM 10" Tablet X-Grip (RAM-HOL-UN9U)

This RAM cradle is the ultimate in versatility

Consists of a composite spring-loaded cradle, expandable grip arms and additional bottom supports. The X-Grip expands and contracts for perfect fit of most 10" tablets with or without cases, as well as some smaller tablets.

Features:
  • Spring loaded holder expands and contracts for perfect fit of your tablet
  • Rubber coated tips will hold your tablet firm and stable
  • Easy access grip knobs, located on the back of the cradle for quick release of your tablet
  • Multiple mounting access points on the back of the cradle
  • Additional support keeper at the bottom (or sides) of the cradle
  • Rustproof

Even if you keep your iPad in a protective case, this cradle works great. With so many options, this cradle has become one of our favorites. Some assembly is required.

Dimensions:

  • Minimum Width = 6.25"
  • Maximum Width = 8.1"
  • Depth = 0.875"


Includes:

  • X-Grip for 10” tablets
  • Circle base with 1” ball
These are simply the finest mounting systems available. Every RAM Mount carries a lifetime warranty.

Out of stock

$78.95
Custom RAM Mount Builder

RAM iPad Mini 4 Cradle with 1” Ball (RAM-B-202-AP20U)

This high strength composite cradle is designed to securely hold an iPad mini 4 without a case. The cradle includes a patent pending roller design allows for smooth placement and removal of the iPad, while keeping it secure while on the go. Compatible and interchangeable with a wide range of popular RAM Mounting products, this cradle is ready to compliment your iPad mini. Cradle comes ready to go with a 1” mounting ball preinstalled. RAM part number RAM-B-202-AP20U.

Lifetime Warranty
These are simply the finest mounting systems available. Every RAM Mount carries a Lifetime Warranty. 

Regular Price: $24.95

Special Price $23.95

Custom RAM Mount Builder

RAM iPad Mini 1-3 Cradle with 1" Ball (RAM-B-202-AP14U)

In a lot of ways, the iPad mini is the perfect size for aviation. It has a screen big enough to read, yet is small enough to mount conveniently in most planes. This cradle securely holds the tablet with it's patented rolling top design. RAM part number RAM-B-202-AP14U.

This iPad Mini Cradle includes the 1” mounting ball preinstalled to the back of the cradle. Integrates with other RAM mounts. Every RAM Mount carries a Lifetime Warranty.

Components:
  • iPad Mini Cradle
  • 1” ball with circle base

Out of stock

$23.95
Custom RAM Mount Builder

Ram Spring-loaded 7" Tablet Cradle

This cradle was specifically designed for smaller tablets. The spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports.

Cradle Dimensions:
Height: 7.3" minimum to 9.62" maximum
Width: Maximum width to 5.31"
Depth: 1.06" maximum

Includes:
Spring-loaded cradle
1” mounting ball

Preassembled for your convenience

Compatible with:
Asus EEE Pad Memo with or without case, sleeve or skin
Barnes & Noble NOOKcolor with or without case, sleeve or skin
BlackBerry PlayBook with or without case, sleeve or skin
Dell Streak 7 with or without case, sleeve or skin
HTC Flyer with or without case, sleeve or skin
7” iPad Mini with or without case, sleeve or skin
7” Samsung Galaxy with or without case, sleeve or skin

$33.95
Custom RAM Mount Builder

Ram 7 Tablet X-Grip Cradle

This spring loaded holder is perfect for holding 7” tablets, especially the iPad Mini. Specially designed rubber pegs hold the tablet tight, even if there is a case on it. Includes 1” mounting ball on the back. For use with other RAM mount products.

Out of stock

$37.95
Custom RAM Mount Builder

RAM iPad 1-4 Cradle Mount

With the infinite number of apps available, the iPad has become a very useful tool in the cockpit. Finally, there is a simple and secure way to mount it.

Lifetime Warranty

These are simply the finest mounting systems available. Every RAM Mount carries a Lifetime Warranty.

Includes:

  • iPad 1-4 cradle
  • Mounting plate

$29.95
Custom RAM Mount Builder

RAM Spring Loaded 10" iPad Cradle

Want to mount your iPad without taking it out of the case? This spring loaded cradle is perfect for all tablets up to 10 3/4” in length. Will work with all 10" iPad models, including the Pro 9.7" and 10.5" and most cases including the Otterbox.

Cradle Dimensions:

  • Height: 8.5" minimum to 10.75" maximum
  • Width: Maximum to 7.75"
  • Edge Depth: Maximum to 0.56"


Includes:

  • Spring-loaded cradle
  • 1” mounting ball

Preassembled for your convenience

Out of stock

$33.95
Custom RAM Mount Builder

RAM iPhone 6 Plus, 6S Plus, 7 Plus and 8 Plus Cradle

This rugged cradle is specifically made for the iPhone 6 Plus, 6S Plus, 7 Plus and 8 Plus. Includes 1” RAM mounting ball preinstalled to the back of the cradle. Does not accommodate cases or screen protectors. For use with other RAM mounting systems. Every RAM mount carries a Lifetime Warranty.

$16.95
Custom RAM Mount Builder

RAM iPhone 6/6S/7/8 Cradle

This rugged cradle is specifically made for the iPhone 6, 6S, 7 and 8. Includes 1” RAM mounting ball preinstalled to the back of the cradle. Does not accommodate cases or screen protectors. For use with other RAM mounting systems. Every RAM mount carries a Lifetime Warranty. 

$16.95
Custom RAM Mount Builder

Ram Phone X-Grip Cradle

Universal Mounts fits most Phones

This compact mount fits most cell phones and iPods, including iPhone 7, 7 Plus, 8, 8 Plus and 10 even with a case. Spring-loaded holder expands and contracts for a perfect fit. Rubber coated tips hold the device firm and stable. Compatible with other RAM mounting accessories.

Minimum width = 1.875" (minimum height = 4.25")

Maximum width = 3.25" (minimum height = 2.25")

Depth = 0.875"

$24.95
Custom RAM Mount Builder

Ram Clipboard

These are simply the finest mounting systems available. Each features hard plastic construction, a durable powder coat finish and infinitely adjustable rubber ball joints. Every RAM Mount carries a Lifetime Warranty.

Includes:

  • Clipboard Mount
  • Mounting Ball

Measures 8" long x 4" wide. 

$42.95
Custom RAM Mount Builder

Ram Cup Holder

Ever wish you had an extra drink holder? Put one anywhere using this holder, a RAM arm, and a variety of different RAM bases. These are simply the finest mounting systems available. Each features sturdy aluminum construction, a durable powder coat finish and infinitely adjustable rubber ball joints. Every RAM Mount carries a Lifetime Warranty.

Includes:

  • Drink Holder
  • Can Cooler
  • Mounting Ball

RAM® Mounting System
No Assembly Required

All RAM mounts are normally purchased in pieces and it is up to you to put it together. When ordering your mount from Sporty’s, we assemble it for you.

$18.95
Custom RAM Mount Builder

Ram 1/4 in. 20 Camera Adapter

The Ram Adapter features the standard one inch ball with a 1/4” mounting screw found on most camera tripods. Great for mounting smaller lipstick cameras in and around the cockpit. For use with other Ram mounting pieces.

These are simply the finest mounting systems available. Each features sturdy aluminum construction, a durable powder coat finish and infinitely adjustable rubber ball joints. Every RAM Mount carries a Lifetime Warranty.

$10.95
Custom RAM Mount Builder

Ram Camera Mount Adapter

The Ram Adapter features the standard one inch ball with circular base, but has the 1/4” mounting screw found on most camera tripods. Great for mounting small video cameras and standard point-and-shoot cameras in the cockpit. For use with other Ram mounting pieces.

These are simply the finest mounting systems available. Each features sturdy aluminum construction, a durable powder coat finish and infinitely adjustable rubber ball joints. Every RAM Mount carries a Lifetime Warranty.

$12.95
Custom RAM Mount Builder

RAM SP-400 Mount Cradle with Ball

Securely mount your radio with this custom designed RAM Mount. Included clip mounts to the back side of the SP-400. Radio slides into the base and the clip locks into place. Bring on the G-Forces, this mount isn’t budging. This custom cradle is constructed with a high strength composite that will withstand years of abuse.

Includes cradle and 1" mounting ball for use with other RAM mounting pieces.  

These are simply the finest mounting systems available. Each features sturdy aluminum construction, a durable powder coat finish and infinitely adjustable rubber ball joints. Every RAM Mount carries a Lifetime Warranty.

$24.95
Custom RAM Mount Builder

Ram Extended Angle Bracket

This RAM bracket is perfect for mounting your aviation GPS over the center of your yoke. Works well with the Garmin aera series GPS units, but will require the cradle and hardware from the yoke mount that came from Garmin. For use with other RAM mounting pieces.

These are simply the finest mounting systems available. Every RAM Mount carries a Lifetime Warranty. #RAM-B-125BU

$12.95
Custom RAM Mount Builder

RAM GoPro Camera Adapter

GoPro cameras are being rapidly adopted into aviation. This simple adapter connects to the bottom of the GoPro case and has the standard 1” RAM mounting ball. For use with other RAM Mount accessories.

$8.95
Custom RAM Mount Builder

RAM X-Grip for Large Phones/Phablets

The RAM X-Grip® has a clean and clever four leg design that sports great holding power. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant holder is ready to compliment your phablet and become the most useful accessory in your vehicle or airplane.

Features:

  • Rustproof
  • High strength composite and stainless steel construction
  • Spring loaded holder expands/contracts for perfect fit of your device
  • Rubber coated tips will hold device firm and stable
  • Versatility of holder allows for attachment to many RAM ball mounts
  • Lifetime warranty
  • Made in U.S.A.


Minimum width = 1.75" (minimum height = 5.5")

Maximum width = 4.5" (minimum height = 3.25")

Depth = 0.875"

Out of stock

$24.95
Custom RAM Mount Builder

RAM Sun Visor

This precision laser cut acrylic sun visor offers ideal blockage of glare while ensuring no obstruction or distortion of view. The dark green 50% tint is ideal for blocking sun and glare in a variety of applications. Includes a 1” ball that can be connected to any 1” RAM socket arm and easily configured for pilot and co-pilot use. Visor measures 13" x 8".

$41.15

Availability: In stock

Make the perfect mount for your airplane!

While we offer a number of pre-built RAM Mount systems, sometimes you need to build your own. Maybe it's a single part you need to upgrade your panel, or maybe you purchased a new iPad. Whatever the reason, our easy-to-use RAM Mount Builder makes it fast and easy to get exactly the system you want.

To build your mount, choose one from each section:

  • The base is the part that attaches to your airplane—...
Read more

Make the perfect mount for your airplane!

While we offer a number of pre-built RAM Mount systems, sometimes you need to build your own. Maybe it's a single part you need to upgrade your panel, or maybe you purchased a new iPad. Whatever the reason, our easy-to-use RAM Mount Builder makes it fast and easy to get exactly the system you want.

To build your mount, choose one from each section:

  • The base is the part that attaches to your airplane—suction cup, yoke, glare shield etc. 
  • The arm connects the base to the cradle. We recommend the Standard Double Arm, unless space is tight. 
  • The cradle is the molded piece that holds your device—GPS, iPad, radio, etc.

These are simply the finest mounting systems available. Each features sturdy aluminum construction, a durable powder coat finish and infinitely adjustable rubber ball joints. Every RAM Mount carries a Lifetime Warranty. 

Reviews
4.5 / 5.0
29 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
22
3
2
0
2
Durability
4.7 / 5
Reliability
4.8 / 5
Performance
4.6 / 5
Ease Of Use
4.6 / 5
Value
4.5 / 5
Reliability
5 / 5
Performance
5 / 5
Ease Of Use
5 / 5
Value
5 / 5
Sporty's service
Works as intended
June 5, 2017
Durability
2 / 5
Reliability
2 / 5
Performance
2 / 5
Ease Of Use
2 / 5
Value
4 / 5
Size and sun blocking Gerat Adjusting Difficult
The Ball on the corner at a 45 Degree angle makes it difficult to adjust. You cannot just flip it down or up it takes 2 hands to maneuver it in and out of position. The size and sun blocking is great once you get it positioned. Much less expensive than other products but could be much better with a fix to the ball location/ angle.
May 30, 2017
Durability
5 / 5
Reliability
5 / 5
Performance
5 / 5
Ease Of Use
5 / 5
Value
5 / 5
Great
A product you can use with confidence.
April 11, 2017
Durability
5 / 5
Reliability
5 / 5
Performance
5 / 5
Ease Of Use
5 / 5
Value
5 / 5
Good, but...
I bought this to reduce the chance of vertigo by moving the iPad from my knee to the yoke and I do think it's better for that. My iPad Air 2 fits securely and with the yoke claw and the claw clamps very securely to the yoke, so I don't worry about if falling off. However, I found that I get confused with the "track up" setting in ForeFlight now, so I switched to "North Up". Also, the mount will interfere with the iPad power button if you don't insert it so the power button faces the "spring" part of the mount. No big deal, just something to be aware of. Overall, it's a good buy and I'm glad I have it.
April 9, 2017
Durability
5 / 5
Reliability
5 / 5
Performance
5 / 5
Ease Of Use
5 / 5
Value
5 / 5
Good product
Worked well for what I needed.
April 5, 2017
Durability
5 / 5
Reliability
5 / 5
Performance
5 / 5
Ease Of Use
5 / 5
Value
5 / 5
Ram Mount
This is a great mount for my iPhone 7 which also has an extra battery built into the case. Works great. I wish everything I bought was as well made as Ram Mount products.
April 3, 2017
Durability
5 / 5
Reliability
5 / 5
Performance
5 / 5
Ease Of Use
5 / 5
Value
5 / 5
Ram
I purchased this mount to go with the dual cups and ipad holder. It sticks like glue and has not moved since i installed it. Great buy.
April 1, 2017
Durability
5 / 5
Reliability
5 / 5
Performance
5 / 5
Ease Of Use
5 / 5
Value
4 / 5
Excellant
Damaged my yoke mount and replaced with suction mount. iPad is now up and to the left, no hidden gauges and only minimal loss of view to the left. Sticks like glue.
March 30, 2017
Durability
5 / 5
Reliability
5 / 5
Performance
5 / 5
Ease Of Use
5 / 5
Value
5 / 5
Fit for purpose
Just switched from an iPad Air to a Mini and needed to switch the Mount. Works well (as did the mount previously used for the Air). Great to be able to place this on the yoke for ease of use and visability.
March 29, 2017
Durability
5 / 5
Reliability
5 / 5
Performance
5 / 5
Ease Of Use
5 / 5
Value
5 / 5
Yoke mount
Very high quality. Works perfect on my Warrior.
March 11, 2017
Question and Answer
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 3 questions Browse 3 questions and 3 answers
Which Claw mounts works on a Bonanza A36?
A shopper on Mar 18, 2018
BEST ANSWER: I would recommend item 8137 for the Bonanza.
which RAM claw yoke mount to use for 1968 Cherokee 180-D ?
A shopper on Feb 17, 2017
BEST ANSWER: The RAM clam mount will work in a Cherokee. You did not mention which iPad you are using.

The RAM system will accommodate the iPad Mini or iPad 1-4 or Air 1/2 or the pro size 9.7.
WHY NOT CHARACTERIZE MOUNTS TO SOME PARTICULAR A/C I.E. WILL A CLAW WORK ON ALL C172/182 YOKES? SURE PEOPLE HAVE THEIR DESIRES FOR SUCTION CUP MOUNTS, BUT NOT ALL WINDOWS HAVE AN AREA OUT OF FIELD OF VIEW FOR AN UNOBSTRUCTED SIGHT PICTURE.
STEVE R on Sep 12, 2016
BEST ANSWER: Unfortunately it depends a lot on the model and the year. Some yoke shafts are thicker than others, and it's not just by model. In general, the smaller Claw will work on Cessna, Mooney and most Pipers. But throw-over Beech and older Pipers (Aztecs, for example) have thicker yokes.
Also Purchased
Order With Confidence

Our Guarantee

Our guarantee has not changed since we introduced our first product in 1962. If for any reason you are not 100% satisfied with your purchase, let us know – we will make it right. If you would like a refund or exchange, please return the product on a timely basis (within 30 days), in the same condition in which it was received. After 30 days, we will continue to support the product for a full year, but refunds and exchanges are not accepted. Personalized products such as embroidered shirts or engraved glasses are not returnable.

Price Guarantee

Sporty’s guarantees competitive pricing on everything we sell. If you find a competitor offering an identical item at a lower advertised price, just mail or fax us the ad, and Sporty’s will match that price.

Standard Express Shipping

We offer the fastest shipping in the business, so you won’t have to wait for your important charts or a last-minute gift. Since we stock almost everything we sell, we offer same day shipping: in-stock orders placed by 5pm Eastern (weekdays), will be shipped that same day, often within minutes of ordering.

Orders shipping to the United States have three shipping options: ground (which typically takes 3-5 days), 2-day air, or overnight. Note that these are days in transit are business days, so Saturday and Sunday are not included. We ship by UPS and US Mail.

Overnight shipping is also available on most items.

Shipping Zone Map

Return Policy

For over 50 years, in addition to same day shipping, Sporty’s has offered same day returns and same day exchanges. Each day, we process all returns and exchanges before new orders go out. We know of no other company who does this!

Sporty’s Shops
ATTN: Returns Dept
Clermont County/Sporty’s Airport
2001 Sporty’s Drive
Batavia, OH 45103
Customer Service
Privacy Policy