Stratus ESG ADS-B Out Transponder - Experimental Aircraft
Trade-Up Program Eligible!
Up to a $1300 rebate
Notes
please allow up to 7 business days for shipping
Wiring Harness not included
Get up to $1300 rebate when you trade in your skyBeacon, tailBeacon, or GDL 82! Click here for details.
The affordable, all-in-one ADS-B Out solution
For too long, ADS-B has been expensive and complicated. Not anymore. The company that revolutionized ADS-B In with the Stratus™ series of portable weather receivers has done it again. Meet Stratus ESG, the affordable, all-in-one answer for adding ADS-B Out to your panel.
All-in-one ADS-B Compliance
Many ADS-B Out avionics are incomplete, requiring you to buy multiple parts or limit your flying. Not Stratus ESG. It has everything you need to meet the 2020 FAA mandate.
- ADS-B Out transponder meets the 2020 FAA mandate
- 1090ES technology – no altitude or geographic limitations
- Integrated WAAS GPS for an all-in-one solution – nothing extra to buy
- Replacement for your Mode C transponder – upgrade your old analog transponder
Fast and Affordable Installation
- Fits in standard transponder slots – typically 50% less to install than remote mounted models
- All-in-one unit - no remote boxes or control heads required
- Complete kit includes all mounting hardware and GPS antenna
Flexible ADS-B In Options
- Complete traffic picture in ForeFlight
- Better ADS-B reception
- Better GPS reception
- Full-time power source
- Works with Stratus 2, 1S, 2S, and 3 (choose install kit above)
- Also works with Dual XGPS 170/190 and Garmin GDL 39/39 3D (requires separate kit)
Stratus ESG is made in the USA and includes a 1-year warranty.
"Stratus ESG met or exceeded all my expectations."
- Dave Hirschman, AOPA Pilot
| Characteristic | Dimension |
|---|---|
| Bezel Width | 6.38 inches (162 mm) |
| Bezel Height | 1.69 inches (43 mm) |
| Rack Width | 6.32 inches (160.4 mm) |
| Rack Height | 1.65 inches (42 mm) |
| Depth from back of bezel to end of strain relief on rack (not compensating for wire bend radius) | 10.75 inches (273 mm) |
| Component | Weight |
|---|---|
| Stratus ESG Unit Weight | 2.75 lbs. (1.25 kg) |
| Stratus ESG Total Installed Weight (Transponder with rack and connectors) | 3.29 lbs. (1.49 kg) |
Additional Resources
Get up to $1300 rebate when you trade in your skyBeacon, tailBeacon, or GDL 82! Click here for details.
The affordable, all-in-one ADS-B Out solution
For too long, ADS-B has been expensive and complicated. Not anymore. The company that revolutionized ADS-B In with the Stratus™ series of portable weather receivers has done it again. Meet Stratus ESG, the affordable, all-in-one answer for adding ADS-B Out to your panel.
All-in-one ADS-B Compliance
Many ADS-B Out avionics are incomplete, requiring you to buy multiple parts or limit your flying. Not Stratus ESG. It has everything you need to meet the 2020 FAA mandate.
- ADS-B Out transponder meets the 2020 FAA mandate
- 1090ES technology – no altitude or geographic limitations
- Integrated WAAS GPS for an all-in-one solution – nothing extra to buy
- Replacement for your Mode C transponder – upgrade your old analog transponder
Fast and Affordable Installation
- Fits in standard transponder slots – typically 50% less to install than remote mounted models
- All-in-one unit - no remote boxes or control heads required
- Complete kit includes all mounting hardware and GPS antenna
Flexible ADS-B In Options
- Complete traffic picture in ForeFlight
- Better ADS-B reception
- Better GPS reception
- Full-time power source
- Works with Stratus 2, 1S, 2S, and 3 (choose install kit above)
- Also works with Dual XGPS 170/190 and Garmin GDL 39/39 3D (requires separate kit)
Stratus ESG is made in the USA and includes a 1-year warranty.
"Stratus ESG met or exceeded all my expectations."
- Dave Hirschman, AOPA Pilot
| Characteristic | Dimension |
|---|---|
| Bezel Width | 6.38 inches (162 mm) |
| Bezel Height | 1.69 inches (43 mm) |
| Rack Width | 6.32 inches (160.4 mm) |
| Rack Height | 1.65 inches (42 mm) |
| Depth from back of bezel to end of strain relief on rack (not compensating for wire bend radius) | 10.75 inches (273 mm) |
| Component | Weight |
|---|---|
| Stratus ESG Unit Weight | 2.75 lbs. (1.25 kg) |
| Stratus ESG Total Installed Weight (Transponder with rack and connectors) | 3.29 lbs. (1.49 kg) |
