Includes course access for yourself with your Sporty's account immediately after checkout.

We'll ship you or the recipient of your choice an online activation code for this course. This physical gift packet includes one activation code and directions on redeeming the course.

uAvionix AV-20S Electronic Flight Instrument

In stock
SKU
3731A
$895.00

The AV-20S incorporates a full-color sunlight-readable display, a bezel-mounted light sensor for automatic display brightness, and an internal battery for operation in the event of power loss. Conveniently fits in your existing 2” panel slot seamlessly. The AV-20-S connects to the pitot and static systems allowing multiple display options. FAA approved as a clock replacement. 

 

 

The AV-20S incorporates a full-color sunlight-readable display, a bezel-mounted light sensor for automatic display brightness, and an internal battery for operation in the event of power loss. Conveniently fits in your existing 2” panel slot seamlessly. The AV-20-S connects to the pitot and static systems allowing multiple display options. FAA approved as a clock replacement. 

Customizable Display:
- AoA Display (Voice Alerting & Peaks)
- G-Meter Display (Voice Alerting & Peaks)
- Attitude (Roll / Pitch) - Clock (GMT / Local)
- Outside Air Temperature (C / F)
- Bus Voltage Display
- Dual User Timers (Count Up / Down)
- Engine Run Timer
- Flight Timer
- Density Altitude Display
- True Airspeed Display (Kts / Mph)
- Audio Alerts (AoA, G Limits, Roll Limits)

With a matte display, the AV-20S is visible in direct sunlight and automatically adjusts brightness to ambient light. NORSEE approved. 


In the box:

Included is the AV-20-S (with internal backup battery), two 1/4″ quick connect fittings, mounting screws, and wire harness.  The harness has all interconnect pins pre-loaded with individually labeled wires.

OAT probe is NOT included and must be purchased separately.  The AV-20-S is compatible with the industry standard Davtron Analog probe, available through common component suppliers.  (If the OAT probe is not connected, OAT, DALT and TAS will not be displayed.)


Specifications

 

Input Voltage Nominal

+10 to +32 VDC

Input Voltage Max

+60 VDC

Input Power Nominal

3 Watts (0.25Amps @ 12VDC)

Input Power Max

6 Watts (0.50 Amps @ 12VDC)

Required Circuit Breaker

1 Amp

Operation on Battery

30 Minutes (Standard 15°C Env)

Physical Attributes

 

Mounting Configuration

2 ¼” Round Instrument Hole

Dimensions wo/Connector

2.4 x 2.4 x 1.2 Inches

Weight

0.25 Lbs.

Electrical Connector

9 Pin Male D-Sub

Pneumatic Connectors

¼” OD Quick Connect

Mounting

(4X) #6-32 Machine Screws

Case Material

High Impact ABS Plastic

Environmental

 

Operating Temp

-20°C to +55°C

Storage Temp (48 Hrs)

-30°C to +80°C (Via Analysis)

Humidity (48 Hrs)

90% RH (Via Analysis)

Display

 

Diagonal Size

1.8”

Contrast Ratio (Typical)

500

Brightness (Typical)

1000 cd/m2

Viewing Angle Left/Right

60°

Viewing Angle Up

45°

Viewing Angle Down

10°

Backlight Lifetime (Typical)

50,000 Hrs

 

The AV-20S incorporates a full-color sunlight-readable display, a bezel-mounted light sensor for automatic display brightness, and an internal battery for operation in the event of power loss. Conveniently fits in your existing 2” panel slot seamlessly. The AV-20-S connects to the pitot and static systems allowing multiple display options. FAA approved as a clock replacement. 

Customizable Display:
- AoA Display (Voice Alerting & Peaks)
- G-Meter Display (Voice Alerting & Peaks)
- Attitude (Roll / Pitch) - Clock (GMT / Local)
- Outside Air Temperature (C / F)
- Bus Voltage Display
- Dual User Timers (Count Up / Down)
- Engine Run Timer
- Flight Timer
- Density Altitude Display
- True Airspeed Display (Kts / Mph)
- Audio Alerts (AoA, G Limits, Roll Limits)

With a matte display, the AV-20S is visible in direct sunlight and automatically adjusts brightness to ambient light. NORSEE approved. 


In the box:

Included is the AV-20-S (with internal backup battery), two 1/4″ quick connect fittings, mounting screws, and wire harness.  The harness has all interconnect pins pre-loaded with individually labeled wires.

OAT probe is NOT included and must be purchased separately.  The AV-20-S is compatible with the industry standard Davtron Analog probe, available through common component suppliers.  (If the OAT probe is not connected, OAT, DALT and TAS will not be displayed.)


Specifications

 

Input Voltage Nominal

+10 to +32 VDC

Input Voltage Max

+60 VDC

Input Power Nominal

3 Watts (0.25Amps @ 12VDC)

Input Power Max

6 Watts (0.50 Amps @ 12VDC)

Required Circuit Breaker

1 Amp

Operation on Battery

30 Minutes (Standard 15°C Env)

Physical Attributes

 

Mounting Configuration

2 ¼” Round Instrument Hole

Dimensions wo/Connector

2.4 x 2.4 x 1.2 Inches

Weight

0.25 Lbs.

Electrical Connector

9 Pin Male D-Sub

Pneumatic Connectors

¼” OD Quick Connect

Mounting

(4X) #6-32 Machine Screws

Case Material

High Impact ABS Plastic

Environmental

 

Operating Temp

-20°C to +55°C

Storage Temp (48 Hrs)

-30°C to +80°C (Via Analysis)

Humidity (48 Hrs)

90% RH (Via Analysis)

Display

 

Diagonal Size

1.8”

Contrast Ratio (Typical)

500

Brightness (Typical)

1000 cd/m2

Viewing Angle Left/Right

60°

Viewing Angle Up

45°

Viewing Angle Down

10°

Backlight Lifetime (Typical)

50,000 Hrs

 


Reviews




Questions & Answers


SHOPPING MADE EASY


  • SAME-DAY SHIPPING


  • QUALITY TESTED PRODUCTS


  • BEST PRICE PROMISE

Question Mark

Have Questions?

We can help!

Our expert pilots are available to answer your questions.
Ask our experts: radios@sportys.com

Eric Carnahan

What we offer

Pilot Tested
Customer Service
Best Price
Express Shipping

Sign up for Special Offers

Stay up to date on new arrivals, email exclusives, and more.