Phillips 66 X/C Aviation Oil X/C 25W-60 (Case of 12)

Ashless Dispersant, Multigrade Engine Oil For Aircraft Piston Engines

Phillips 66 X/C Aviation Oil X/C 25W-60 is an ashless dispersant, multigrade engine oil specially formulated for year-round use in aircraft piston engines. It provides distinct performance benefits compared with single-grade engine oils, including easier starting and faster oil circulation at low temperatures, reduced warm-up time, and reduced oil consumption in most engines. It maintains its film strength under high loads and at high temperatures to protect against wear and piston scuffing. The ashless dispersant formulation helps minimize the formation of engine sludge, varnish, piston deposits, and combustion chamber deposits, resulting in a much cleaner engine compared with the use of straight (nondispersant) mineral oils. X/C Aviation Oil was the first FAA-approved mineral oil-based, ashless dispersant, multi-viscosity aviation engine oil. It has more than 30 years of outstanding, proven performance in a wide variety of aviation uses.

Sold by the Case (12 Quarts).

Features & Benefits
Ashless dispersant helps minimize engine sludge and varnish deposits for a cleaner engine
Easier starting and faster oil circulation at low temperatures compared with single-grade oils
Reduced warm-up time and cooler operating temperatures compared with single-grade oils
High film strength for protection against wear and piston scuffing, even under high-load conditions, such as takeoff, and at elevated operating temperatures
Provides cleaner and quicker break-in than traditional all-mineral, non-additized, single-grade oils
Protects against rust and corrosion
Reduces oil consumption in most engines
Suitable for year-round use

Applications
X/C 25W-60 Aviation Oil is recommended for use in radial piston engines and in other aviation piston engines originally designed to run on heavier-grade oils, such as Commercial Grade 120
Recommended for use during break-in and then as the operational oil until TBO
Avco Lycoming Material Specification No. 301G
Pratt & Whitney Service Bulletin No. 1183 Rev. U
SAE Standard J1899
Teledyne Continental Material Specification MHS-24B
U.S. Military Specification MIL-L-22851D (obsolete) for additive treatment
QPL Approval Numbers: D07L1-20W-50 (X/C 20W-50), D07L1-25W-60 (X/C 25W-60) X/C® Aviation Oil

X/C Aviation Oil Specs